|
Q. Do you offer left hand and right hand threaded arms?
A. No. In a perfect world this would make setting up your suspension easier. However what we have found is it causes more issues then good. If the jam nut loosens up, the arm settings can change as you drive. Another issue is suspension bind. When you setup the 4 link rear, you want to make sure both upper arms are under the same load. If you try to adjust these arms to set a new pinion angle most likely one arm will be under more load then the other, causing bushing to wear our faster. Take the time to properly setup your suspension system during your first install and you will have years or trouble free wheeling.
Q. Do you sell custom length control arms or pieces of a kit?
A. Yes, but they are not available on our online store. Please call (203) 757-0339 or e-mail and we will be glad to help you with your order.
Q. Ordered a TJ/LJ/XJ/ZJ long arm kit, and one upper arm is straight and one is bent?
A. The straight upper control arm is used on the passenger side. The bent or angled one is used on the driver side. The angle is done for additional clearance for a high pinion axle. It may not make a difference on a D30 but with a HP D44 and HP D60 this angle make a difference.
Q. How is my order shipped?
A. We ship all our products using UPS. All products are shipped SIGNITURE REQUIRED and fully insured. If you are not available for this signiture you will need to make arrangements to pick up your package at a UPS center. We can also ship to a UPS store, or your work.
Q. Do you sell replacement bushings?
A. Yes. You can order direct from our online store. Control arm bushings, and trackbar bushings are available here.
Q. Do you sell direct to your customers?
A. Yes. You can order direct from our online store. Or if you have any questions, or need help deciding what items you need for your specific needs, please call and ask, we are here to help.
Q. Why should I choose Clayton Off Road vs. anyone else?
A. There are many reason. Our reputation for a quality product, our customer service and our high level on knowledge on the products we sell. But every website probably says the same thing. Please do some research about us, we know you will come back.
Q. Why do you use square tubing vs. round tubing?
A. Structurally, square tubing is stronger in the application we are using it in. Now this people have been arguing over for years. Is square stronger, round DOM, chrome moly, solid. We know our suspension systems are the strongest on the market. Once you see one, you will be convinced. And to help take any doubt out of your mind, we offer a lifetime warrantee on all our control arms. If you bend or break any of our control arms for any reason, we will warranty it. For more information about this warranty and general warranty on all of our products please click here.
More Q & A questions coming soon.
If you have a question you think should be listed on this page, please email us at corm@claytonoffroad.com |
