TJ/LJ/XJ/MJ Heavy Duty Tie Rod System

RockJock's Currectlync heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 С� Inch diameter forged alloy drag link, and 1 С� Inch solid alloy steel tie rod bar that is bored and threaded on the ends.

All 7/8 Inch thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts.

No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200 percent stronger than the stock components.

Note: This unit is designed to be used on vehicles with 4 Inch of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2 Inch bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.

Details:

• Currectlync Steering System
• 97-06 Wrangler TJ and LJ Unlimited/XJ/MJ
• Bolt-On
• Includes 1 1/4 Inch Diameter Tie Rod/Forged Drag Link
• HD Steering Stabilizer Shock Mounting Kit
• PLEASE NOTE: Rod end can be damaged by attempting to force grease into them. You NEVER want to use a power grease gun on these rods. Only use a hand pump (low pressure) grease gun, so that you can feel if the rod ends are taking grease. Attempting to force grease in will pop the back cap on the rod end out, doming the cap, and destroying the rod end. DAMAGE CAUSED TO ROD ENDS BY FORCING GREASE IN OR USING A POWER GREASE GUN IS NOT COVERED UNDER WARRANTY! Use only non-synthetic, high moly lube grease.