Jeep Wrangler Drag Link Flip Kit Bracket (2007-2018, JK)

Jeep Wrangler Drag Link Flip Kit Bracket (2007-2018, JK)

Upgrade your lifted Jeep with our Drag Link Flip Kit Bracket, designed to correct steering geometry and improve front-end alignment on lifted Jeep Wrangler JK models. Designed for use with Clayton Off Road 3.5 and 4.5-inch lift kits, this high-steer bracket raises the track bar for proper geometry while providing additional clearance between the track bar and differential cover.

The 1/4" track bar bracket bolts into the factory track bar location and welds directly to the front axle for superior strength. The bracket also incorporates a relocated lower sway bar mount and can be installed using the supplied hardware before welding, allowing you to drive the Jeep to a qualified welder for final installation.

Key Features:

• Strengthened Track Bar Bracket:
  • Constructed from 1/4" steel and designed to bolt into the factory location before being welded to the axle.
  • Strengthens the factory track bar mounting location.
• Raised Track Bar Mount:
  • Raises the track bar to provide proper steering geometry when used with a drag link flip.
  • Adds clearance between the track bar and differential cover.
• Relocated Sway Bar Mount:
  • Incorporates a new lower sway bar mounting location.
• Bolt-In Installation:
  • Installs using the factory track bar location.
  • Includes three 3/8" bolts and one 9/16" bolt with spacer.
  • Allows the Jeep to be temporarily driven before welding is completed.
• Driveway-Friendly Installation:
  • The bracket can be drilled and bolted into place at home, allowing the Jeep to be driven to a qualified welder for final installation.

Performance Benefits:

• Corrects steering geometry on lifted JK models.
• Raises the track bar for proper alignment with a drag link flip.
• Provides additional clearance between the track bar and differential cover.
• Strengthens the front axle track bar mounting location.
• Provides a relocated lower sway bar mounting point.

Specifications:

• 1/4" Bolt & Weld-In Track Bar Bracket
• Raised Track Bar Mount
• Relocated Lower Sway Bar Mount
• 3/8" & 9/16" Mounting Hardware Included
• Welding Required
• Made in the USA!

NOTE:

1. Welding is required for final installation.
2. Clayton Off Road adjustable front track bar highly recommended.